Ensure your products perform under stress with accredited mechanical testing and advanced environmental testing services from Austest Laboratories. We validate safety, durability and compliance by simulating real-world shock, vibration and load conditions.
Mechanical and Dynamic Testing Capabilities
At Austest, we are one of Australia’s leading providers of accredited mechanical testing, including vibration, shock, and custom fatigue testing across defence, transport, and industrial applications. Our laboratory is equipped with advanced systems for precision load testing, high-energy impact testing, and combined environment simulations.
More Information - Mechanical and Dynamic Testing Capabilities
Vibration and shock test facilities in NSW, VIC and SA
MIL-STD-202G:5 modern electrodynamic shakers
- Force capacity up to 60 kN (vibration), 120 kN (shock)
- Displacement up to 100 mm (unique in Aust.)
- Payloads up to 2000 kg
- Combined vibration / temperature testing
2 heavy-duty shock machines
- Payloads up to 1,500 kg
- Acceleration levels up to 600g
- Half-sine, Sawtooth and Trapezoidal pulses
Shock Response Spectrum (SRS) test facility (unique in Aust.)
- High-level and high-displacement SRS profiles
- Frequency range 1-2000 Hz
- Meets RAN NTB requirements for Naval Shipborne Shock testing to Mil-S-901D/E, BV043, DEF(AUST)5000
Payloads up to 900 kg
High-acceleration shock machines
- Acceleration levels up to 30,000g
- Payload up to 100 kg
Specialized vibration machines (asynchronous motion, long-stroke reciprocating motion etc.)
Sustained acceleration (centrifuge) machine
- MIL-STD-810, RTCA DO-160
- Payloads up to 100 kg, 20 g acceleration
High-speed impact testing machine, up to 500 J
Universal load testing (compression/tension) machine, 100 kN
Static and Dynamic inclination table, MIL-HDBK-2036
Packaged drop tester, up to 80 kg
Enclosure protection test facilities
- Ingress protection – IP code
- Impact protection – IK code
Customized fatigue test rigs – automotive harnesses , train seats, cyclic impact, strength, slam open/close, wear and cyclic fatigue.
Our environmental testing services meet both national and international standards across defence, transport, automotive, and electronics sectors. We are accredited to test to the following standards:
Accreditations
Generic:
- IEC/EN/AS 60068-2-6
- IEC/EN/AS 60068-2-64
- IEC/EN/AS 60068-2-27
- IEC/EN/AS 60068-2-7
- IEC/EN/AS 60068-2-31
- IEC/EN/AS 60068-2-55
- IEC/EN/AS 60068-2-81
Defence:
- MIL-STD-167-1A
- MIL-STD-810G
- MIL-STD-202
- MIL-STD-883
- DEF STAN 00-35
- DEF(AUST) 5168
- RTCA DO-160G
- MIL-HDBK-2036
Rail:
- IEC/EN 61373
- IEC/EN 50155
- EN 50125-3
- AREMA C&S Manual
Automotive:
- ISO 16750-3
- GMW14650
- GMW3172
- GMW3172
- SAE-J1455
Enclosure Protection:
- IEC 62262
- IEC/EN/AS 60068-2-75
- IEC/AS/NZS 60529
Others:
- AS/NZS 1158.6 (luminaries)
- ANSI C136.31-2010 (luminaries)
- IEC 60255-21-1 (electric relays)
- IEC 60255-21-2 (electric relays)
- IEC 60255-21-3 (electric relays)
- AS/NZS 3439.5 (low voltage switchgear)
- ISO/AS 7240 (fire detection systems)
- IEC 61243-2 (voltage detectors)
- BS/EN 45502-1 (surgical implants)
- AS NZS 4386.1 (Kitchen Units)
- AS/NZS 3013 (Wiring elements)
- AS/NZS 4387.5—.8 (Kitchen assemblies)
Transport:
- ISTA 3A
- ISTA 2A
- ISTA 1A
- ISTA 2B
- ASTM D4169-16
- ASTM D4728-01
- ASTM D999
- ASTM D6179
- ASTM D880
- ASTM D4003
- ASTM D5265
- ASTM D5276
- ASTM D5487
- ASTM D6055
- ASTM D6179
- ASTM D6344
- IATA PI968
- ST/AG/AC.10/11/Rev. 6
Sector Capabilities
Our mechanical testing and load testing services are trusted across a range of industries, including:
- Defence:Compliance with MIL-STD shock, vibration, SRS and centrifugal testing
- Rail and Automotive:Fatigue, resonance, long-term wear simulation and thermal-vibration combinations
- Aerospace:testing to ISO 19683 and RTCA DO-160
- Consumer Products:Packaged drop tests, IP and IK rating assessments, and transportation durability
- Lighting, Switchgear and Electricals:Slam, wear, and abuse testing per AS/NZS standards
- Medical and Surgical Equipment:Cyclic fatigue and strength tests to BS/EN 45502 and more
Why Choose Austest for Mechanical and Dynamic Environmental Testing?
At Austest, we are one of the few labs in Australia offering full-spectrum environmental testing services alongside accredited mechanical testing. Our investment in advanced facilities and technical leadership ensures precise, repeatable test outcomes, no matter the product or standard.
- Accredited under NATA and ILAC MRA
- Integrated enviro testing and mechanical programs
- In-house fixture design and fabrication
- Experience with defence, aerospace, transport, and industrial clients
Ensure your product meets performance and durability requirements with accredited mechanical testing and environmental testing services. Contact our team today.
FAQs
What is mechanical and dynamic environmental testing?
Mechanical and dynamic environmental testing refers to controlled simulation of shock, vibration, pressure and stress conditions using mechanical testing and enviro testing methods.
What is the standard for mechanical and dynamic testing?
Standards include MIL-STD 810, RTCA DO-160, and ISO 19683, depending on the product and sector.
What industries do you serve with your mechanical testing services?
We assist defence, automotive, rail, aerospace, and manufacturing sectors requiring certified mechanical testing and load testing.
